Address
House-180, Road-2, Baridhara DOHS, Dhaka 1206, Bangladesh
Work Hours
Saturday to Thursday: 9am – 6pm
Weekend: 2pm – 6pm
MAPECOAT EPN 24 AP
Two-component, solvent-free, novolac epoxy coating for high chemical-resistant applications.
ectlbdadmin
TRIBLOCK P
Three-component, epoxy-cementitious primer for waterproofing damp substrates, including non-absorbent ones. Where to use:Triblock P is used as a waterproofing system for damp substrates, especially:– old ceramic or terrazzo floor dressings on substrates with excessive residual humidity;– cementitious substrates with a…
PRIMER SN
Two-component epoxy primer with fillers.May be coloured with MAPECOLOR PASTE. TECHNICAL DATA:Mixing ratio: component A : component B = 80 : 20.Colour of mix: neutral.Consistency of the mix: viscous fluid.Density of mix (kg/m³): 1500.Viscosity of the mix (mPa·s): 1,100 ±…
NOVOPLAN 257
Rapid hydrating, fast-drying self-levelling compound.
TOPCEM
Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA:Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from 0 to 8 mm) and 120-140 kg of water for dry inerts.Workability time: 40÷60 minutes.Set…
MAPEFLEX PSU SL IN
Elastic chemical resistant polysulphide self-levelling sealant.
MAPEFLEX MS40 IN
Elastic hybrid polymer sealant.
MAPESIL LM
Neutral silicone mould-resistant sealant with BioBlock® technology for stone for movements up to 25%. TECHNICAL DATA:Movement in service: 25%.Modulus of elasticity at 100% elongation: 0.35 N A hardness: 21.Workability time: 15 minutes.Colours: transparent, 100 white, 110 grey, 111 grey, 112…
MAPEFLEX MS45 IN
Elastic multipurpose hybrid polymer sealant and adhesive
MAPESIL AC
Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for movements up to 25%. TECHNICAL DATA:Movement in service: 25%.Modulus of elasticity at 100% elongation: 0.35 N A hardness: 20.Workability time: 10 minutes.Colours: 34 colours + transparent.EMICODE: EC1 Plus – very low…
KERAPOXY
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA:Pot life of mix: 45 minutes.Open time: 30 minutes.Set to light foot traffic:…
KERACOLOR GG
Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA:Pot life of mix: approx. 2 hours.Waiting time before finishing:10-20 minutes.Set to light foot traffic: approx. 24 hours.Ready for use: 7-10 days.Colours: 14.Application: rubber MAPEI trowel…