House-180, Road-2, Baridhara DOHS, Dhaka 1206, Bangladesh

Work Hours
Saturday to Thursday: 9am – 6pm
Weekend: 2pm – 6pm

Mapefer 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.

Mapefer 1K is used as a re-alkalising corrosion-inhibiting protection for reinforcing rods in the reparation of concrete carried out with shrinkage compensating mortars from the Mapegrout range or with normal cement mortars modified with synthetic resin latexes. It can be applied also in underground concrete constructions. Mapefer 1K is a single component mortar based on polymers in water dispersion, cement binders and corrosion inhibitors, to be applied on reinforcing rods to prevent rust formation. Apply two coats of Mapefer 1K with a brush on the re-bars freed of rust. The second coat can be applied after 90-120 minutes after the application of the first coat but preferably within 24 hours. It is recommended to completely cover the surfaces of the rods in one homogeneous coat. The total thickness of the two coats must be approximately 2 mm. Reparation with products form the Mapegrout range must be carried out once Mapefer 1K is dry (approximately 6 hours at 20°C).

Maximum dimension of aggregate: 0.5 mm.
Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of water.
Pot life of mix: approximately 1 hour (at +20°C).
Minimum applicable thickness: 2 mm.
Waiting time between each coat: approximately 2 hours.
Waiting time before applying mortar: 6-24 hours.
Classification: EN 1504-7.
Storage: 24 months.
Application: brush in two coats.
– 100 g/m for 8 mm diameter rebar (2 mm of product applied).
– 250 g/m (approximately 2 mm of applied product on an 8 mm diameter rod).
Packaging: boxes of four 5 kg alu bags.